The pool pump is considered the heart of the swimming pool. It acts as the primary source of the entire plumbing system of the pool. A pool pump is required to circulate water going through the filters of the whole swimming pool (to clean the water appropriately). Proper circulation of clean water is what pool pump primary do. Without it, a swimming pool is more likely to be just a cement pond, full of stagnant water that is not ideal for diving.

Meanwhile, a solar pool cover cannot consider as just an ordinary pool cover that keeps dirt and debris off the pool water. It is a unique cover that helps maintain heat provided by the sunlight on hot summer weather. Let us figure it out.

Can You Run Pool Pump With Solar Cover On
Cleaning pump working with a swimming pool. Horizontal shot

When the swimming pool is wide open, without any cover on top of it, the absorption of direct heat from the sun takes place. It is probably, 60% of the sun’s heat energy. The kind of weather that will be enough to heat the swimming pool at a certain degree in every hour. However, the said heat gain comes with evaporation. With the presence of water, current air temperature, the actual humidity and wind blowing on the pool water surface, evaporation is turning on. The expected heat has lost because of this. 

By using a solar pool cover, heat coming from the sun can be transferred straight to the swimming pool to warm it. It controls evaporation it such a way that it blocks the connection of the pool water with the atmosphere. Although we do not pertain as warm as the gas or electric heater can provide. It still depends on the area and environment. It’s on how hot the surroundings are. However, despite this fact, the bottom line is that solar covers are very much helpful in a way that it can stop evaporation, and can warm pool water at a lower cost.

Solar pool covers are convenient. Easy to put on, easy to remove. That is why you can run the pool pump with a solar cover in it. The solar cover will not cause any interference on the work of the pool pump. It can never also get a chance to be sucked by the swimming pool skimmer. It will not block the skimmer either. The pump can be still possible to operate the whole day and the entire season. There is nothing to worry about this. Pool lovers can get in and out of the swimming pool all day. Just remove the pool cover every time you want to go swimming, or might as well swim on the pool with the cover on?– Not a good idea. So before getting into the swimming pool, remove the solar pool cover first. Also, remember to return it on, the same way, when done with the pool.

There is no problem with using the pool pump when a solar cover is on. Doing so is entirely safe. 

Visit this site for more information about pool covers including blue wave pool cover | poolcovershq.com, sun2solar crystal clear solar cover, and more.

To keep a swimming pool cover from blowing off requires deep thought. It is a bit of a challenge to find answers and to give it a try.  Heavy rains, falling debris, strong winds, are only a few of the factors that may cause pool cover to blow off. So admit it, these factors are inevitable–can not prevent nor control. So what’s left to do is to find a solution.

One suggestion is to use some accessories that can help keep the pool cover to stay in place. By doing this, you will need materials like tracks, swimming pool vacuum, ropes, leaf nets, and weights. Also, to do the preventive measurement, here are some tips:

How to Keep Pool Cover from Blowing Off

Use a durable swimming pool cover that will surely stay in place. These are covers made from vinyl plastic, polypropylene, or the UV-stabilized polyethylene sheet, with the exact measurement of the swimming pool.

Put tracks on top of the swimming pool. Attach the pool cover to them. Secure the edge of the cover on trails to prevent it from blowing off.

Place a leaf net on top of the swimming pool cover.  It is to remove leaves and other elements on top of the cover more straightforward to prevent weighing down the pool cover from accumulated dirt on top. Make a regular schedule on removing the leaf net. Empty the net as possible. 

Only allow small amounts of water on top of the pool cover to help keep the cover to stay in place. Pump off the rest.

For additional preventive action, use weighted objects (sandbags or bricks). Tie the end of a long rope with it and the next end on the grommets on corners of the pool cover. Let the weighted object reach the ground and at the same time, pulls edges of the cover. 

Continue doing step #5 with equal spaces on the entire swimming pool. These weights can prevent the swimming pool cover from blowing off on a very windy day. 

Same applies with the above ground pool cover type. Only adds a few tips. Since they use cables and winch, a preliminary act of double-checking the attachment of cables and winch. That they should be appropriately secured and tight, replace old cables and winch if any. Moreover, to add additional protection, make use of pool clips along the railings of the swimming pool to help hold the cover tight. Then do the same as stated from step #3-#6.

Also, as an additional reminder on both swimming pool covers (above ground/in-ground) :

Always check the condition of the pool cover.  Repair or either replace the cover if it has found any rips or tears. Do not put any sharp objects on top of the pool cover. Sharp objects can easily break or damage pool covers. Have a regular visit on the pool area to see for yourself the situation and to be of peace that everything is okay. The pool cover is perfectly fine. That should be the primary goal.