The pool pump is considered the heart of the swimming pool. It acts as the primary source of the entire plumbing system of the pool. A pool pump is required to circulate water going through the filters of the whole swimming pool (to clean the water appropriately). Proper circulation of clean water is what pool pump primary do. Without it, a swimming pool is more likely to be just a cement pond, full of stagnant water that is not ideal for diving.

Meanwhile, a solar pool cover cannot consider as just an ordinary pool cover that keeps dirt and debris off the pool water. It is a unique cover that helps maintain heat provided by the sunlight on hot summer weather. Let us figure it out.

Can You Run Pool Pump With Solar Cover On
Cleaning pump working with a swimming pool. Horizontal shot

When the swimming pool is wide open, without any cover on top of it, the absorption of direct heat from the sun takes place. It is probably, 60% of the sun’s heat energy. The kind of weather that will be enough to heat the swimming pool at a certain degree in every hour. However, the said heat gain comes with evaporation. With the presence of water, current air temperature, the actual humidity and wind blowing on the pool water surface, evaporation is turning on. The expected heat has lost because of this. 

By using a solar pool cover, heat coming from the sun can be transferred straight to the swimming pool to warm it. It controls evaporation it such a way that it blocks the connection of the pool water with the atmosphere. Although we do not pertain as warm as the gas or electric heater can provide. It still depends on the area and environment. It’s on how hot the surroundings are. However, despite this fact, the bottom line is that solar covers are very much helpful in a way that it can stop evaporation, and can warm pool water at a lower cost.

Solar pool covers are convenient. Easy to put on, easy to remove. That is why you can run the pool pump with a solar cover in it. The solar cover will not cause any interference on the work of the pool pump. It can never also get a chance to be sucked by the swimming pool skimmer. It will not block the skimmer either. The pump can be still possible to operate the whole day and the entire season. There is nothing to worry about this. Pool lovers can get in and out of the swimming pool all day. Just remove the pool cover every time you want to go swimming, or might as well swim on the pool with the cover on?– Not a good idea. So before getting into the swimming pool, remove the solar pool cover first. Also, remember to return it on, the same way, when done with the pool.

There is no problem with using the pool pump when a solar cover is on. Doing so is entirely safe. 

Visit this site for more information about pool covers including blue wave pool cover |, sun2solar crystal clear solar cover, and more.

To keep a swimming pool cover from blowing off requires deep thought. It is a bit of a challenge to find answers and to give it a try.  Heavy rains, falling debris, strong winds, are only a few of the factors that may cause pool cover to blow off. So admit it, these factors are inevitable–can not prevent nor control. So what’s left to do is to find a solution.

One suggestion is to use some accessories that can help keep the pool cover to stay in place. By doing this, you will need materials like tracks, swimming pool vacuum, ropes, leaf nets, and weights. Also, to do the preventive measurement, here are some tips:

How to Keep Pool Cover from Blowing Off

Use a durable swimming pool cover that will surely stay in place. These are covers made from vinyl plastic, polypropylene, or the UV-stabilized polyethylene sheet, with the exact measurement of the swimming pool.

Put tracks on top of the swimming pool. Attach the pool cover to them. Secure the edge of the cover on trails to prevent it from blowing off.

Place a leaf net on top of the swimming pool cover.  It is to remove leaves and other elements on top of the cover more straightforward to prevent weighing down the pool cover from accumulated dirt on top. Make a regular schedule on removing the leaf net. Empty the net as possible. 

Only allow small amounts of water on top of the pool cover to help keep the cover to stay in place. Pump off the rest.

For additional preventive action, use weighted objects (sandbags or bricks). Tie the end of a long rope with it and the next end on the grommets on corners of the pool cover. Let the weighted object reach the ground and at the same time, pulls edges of the cover. 

Continue doing step #5 with equal spaces on the entire swimming pool. These weights can prevent the swimming pool cover from blowing off on a very windy day. 

Same applies with the above ground pool cover type. Only adds a few tips. Since they use cables and winch, a preliminary act of double-checking the attachment of cables and winch. That they should be appropriately secured and tight, replace old cables and winch if any. Moreover, to add additional protection, make use of pool clips along the railings of the swimming pool to help hold the cover tight. Then do the same as stated from step #3-#6.

Also, as an additional reminder on both swimming pool covers (above ground/in-ground) :

Always check the condition of the pool cover.  Repair or either replace the cover if it has found any rips or tears. Do not put any sharp objects on top of the pool cover. Sharp objects can easily break or damage pool covers. Have a regular visit on the pool area to see for yourself the situation and to be of peace that everything is okay. The pool cover is perfectly fine. That should be the primary goal.

Have you ever thought of enjoying your hot summer day without leaving your home? Of course, everybody loves this idea. However, how will you have a good time when all kinds of dirt like falling leaves and debris dominates your above ground pool? Well, worry no more. Here’s a tip on how you can cover your above ground pool efficiently so you can have the fullest experience.

Tip #1 – Choose your type of cover WISELY

Before you learn how to cover your above ground pool skillfully, the very first thing you need to do is select the best protection. There are multiple types of cover, depending on what you need. Some of these are debris cover, mesh cover, winter cover, solar cover, and other additional options like plywood sheets, tarps, and etcetera. 

    Debris Cover

This is the basic and least expensive type of cover, the typical cover you use when you want to guard your pool water against falling leaves, debris, and insects. Though affordable, this type of shield does not hold heavy objects that pools on top (e.g., rainwater, etc.).

    Mesh Cover

This type of cover has a fabric that permits water to penetrate so that it won’t bulk up.

    Winter Cover

This is somehow expensive; however, this cover protects your pool, especially the internal part during a long winter season. 

how to cover an above ground pool

If you have decided which type of cover to purchase, let’s start the installation.

Tip #2 – Clean your pool THOROUGHLY

In other words, winterize your pool. It is essential to clear it up before you cover it to avoid the struggle of removing the cover when something came up (e.g., you forgot to add the applicable pool chemicals). 

Tip #3 – It’s time to set up your POOL COVER

Make sure you buy a cover bigger than the size of your pool. Ask for help to spread the sheet on your pool, extend it widely on all sides of the pool and wrap it up to secure that your pool is covered tightly and completely.

Tip #4 – Ensure your COVER’S PERMANENCE

Now that you have laid your cover, keep it fastened. Slide the cable through the loops or grommets around the edge of the cover then pull it and tightened it correctly.

Tip #5 – Prevent FUTURE DAMAGE

Above ground pool cover usually got destroyed easily when the wind consistently beats them. This is the reason why you have to defend the cover, especially the ones hanging at the side. You can use pool clips so the cover won’t be staggered anymore.

All done! Keep in mind that everything needs to be set up correctly to function effectively. Covers take care of our pool, but it requires attention too. So make sure you check your cover from time to time after you have it installed. Just as the saying goes, you reap what you sow. When you invest in an above ground pool cover, you’ll receive an innumerable benefit in return. Now you’ll need all the materials to clean your pool, buy the perfect cover, get a helping hand and you’re set. Enjoy your durable above ground pool cover! 

Pool covers can be costly, making it difficult to replace it every time there is a tear. Unfortunately, pool covers, especially winter covers, can get destroyed easily, especially when there is heavy snowfall or rainfall. Therefore, you need to learn how to repair the swimming pool cover when yours has a tear. I mean, you do not want to keep paying for the covers or people to help you recover it.

However, the repair process will vary based on the type of cover you have. For instance, you cannot have your mesh/net repaired the same way as a vinyl cover. We are going to talk about ways to fix the most common types of pool covers.

Repair Swimming Pool Cover

How To Repair Swimming Pool Cover – Repairing A Vinyl Cover

It is pretty easy to improve this type of swimming cover. Even though vinyl covers are made to last and protect the pool from direct sun and debris, they can develop a tear at some point. Your warranty might have already expired. However, you do not have to be alarmed if your cover has damage as you can be able to mend it.

Most covers will come with a vinyl repair kit which contains a patch and vinyl adhesive that you can use. You will first of all have to take it off the swimming pool and onto the ground. After drying the torn part, apply the vinyl adhesive and place the patch on the hole. It should have your cover back to use.

Ensure that you cut the patch in a rounded spot. This way, the corners will not peel, leaving the piece open.

Repairing Mesh/net covers

These are also pretty easy to repair. Usually, you will only have to get a patch and sew in on the torn mesh. You can use needles and nylon thread for this process. However, a transparent cover might not require a needle as it is also delicate. You will be able to have it back on the pool within minutes.

You can also be able to care for your pool cover to reduce the instances of being destroyed. As we had talked about replacing a pool cover every time yours gets torn. The following tips will help you take care of your pool, especially when you want to store it;

Clean the cover using a hose right after you take it off.
You may use some soap to clean out the stains on the cover.
Make sure that your pool is always clean.

In addition to the above discussed, it is essential to remember not to tamper with your cover if your warranty is still valid. You can call the company from which you purchased the cover, of course, that is if the cover is damaged.

This way, you can have professionals fix it, or get a replacement. Most of these pool covers come with a few years of warranty.